Crumb Rubber Sourcing Guide: Grades, PAH Limits and Packaging

Crumb Rubber Sourcing Guide: Grades, PAH Limits and Packaging

Crumb Rubber Sourcing Guide: Grades, PAH Limits and Packaging
2026.11.16

Crumb rubber is what a tire becomes after the steel and textile are removed. Buyers often treat it as one commodity, yet at least four products carry that name: black tire crumb, colored EPDM granules, thermoplastic granules, and fine rubber powder. This guide covers the black crumb that industrial buyers usually mean — how its grades are defined, what separates a clean lot from a cheap one, and what a compliant shipment looks like on paper.

Quick answer

• Crumb rubber is graded by particle size, free steel, fiber and moisture, not by the word purity.

• Ambient ground crumb rubber is rough and bonds well; cryogenic material is smooth, clean and narrow in distribution.

• For EU infill and loose sport surfacing, eight PAHs must be ≤20 mg/kg, with a batch number on the bag.

Product Overview

Tire-derived crumb rubber is a vulcanized blend of natural and styrene-butadiene rubber with carbon black, zinc oxide and curing agents. The cross-links are permanent, so a granule does not melt and cannot be co-vulcanized into a new compound. It works as a filler or a modifier, and the interface has to be managed with surface activation or coupling agents.

Four names get confused. Crumb rubber and tire rubber granules describe the same ground material, classified by mesh. Rubber powder is the fine end of the family, roughly 30–200 mesh, used where a smooth dispersion matters. 

Crumb Rubber Sourcing Guide: Grades, PAH Limits and Packaging

Specifications and Grades

The mesh scale runs opposite to particle size, which is where most quotation errors start: 18 mesh is about 1.0 mm and 80 mesh is 0.18 mm.

Parameter

Typical range

What to write in the PO

Granule size

0.5–5 mm (about 4–35 mesh)

One band, plus an oversize limit

Powder size

30–200 mesh

Method: sieve or laser

Free steel

≤0.1%

EN 14243-2 sampling

Fiber

≤0.3%

Maximum, by weight

Total foreign matter

≤0.5–0.8%

Same method as above

Moisture

≤0.5–1.0%

105 °C

Ash

5–10%

Higher ash means sand or filler

Bulk density

300–500 kg/m³

Container and bag planning

Eight PAHs

≤20 mg/kg

Batch identifier required

Ask any crumb rubber supplier for one number that is missing from most quotations: zinc. Tire crumb carries roughly 3% zinc from the curing system, so a heavy-metal-free statement cannot be true for this material. What can be documented is a migration or content test against the rule that applies in your market.

Core Advantages

• It displaces virgin polymer on cost, not on strength. At moderate loading, crumb rubber lowers compound cost; at high loading, tensile and tear values fall, which is why the loading rate belongs in the specification.

• Grading can be held stable. A narrow cut of tire rubber granules with controlled fines keeps binder viscosity, asphalt digestion time and molded-part density repeatable.

• Two grinding routes, two behaviors. Ambient crumb rubber raises binder viscosity and is the usual choice for rubber-modified asphalt; cryogenic material gives a cleaner, narrower cut for fine rubber powder and appearance-sensitive parts.

• Full-tire recovery. Steel and textile leave the process as separate streams, which is what makes the recycled-content claim defensible.

• Documentation shortens review. A sieve analysis, an impurity report and a PAH result let a buyer clear customs and tender review without re-testing.

Applications

• Rubber-modified asphalt: crumb rubber or fine rubber powder is dosed by binder weight according to the mix design, and grading affects digestion time and rutting resistance.

• Molded goods: mats, tiles, gaskets and bumpers made from rubber powder or surface-activated granules, with a controlled loading rate.

• Artificial turf infill and loose sport surfaces, where the EU PAH rule and the 2031 infill transition apply to every granule.

• Playground base layers: rubber granules bonded with polyurethane binder.

• Acoustic and vibration products, where the void structure matters more than color.

• Civil engineering uses a separate grade: tire-derived aggregate, sized in tens of millimeters and specified under ASTM D6270 rather than as crumb rubber.

Crumb Rubber Sourcing Guide: Grades, PAH Limits and Packaging

Packaging and Delivery

Standard packing is 25 kg woven bags, palletized or loose in the container, with jumbo bags and moisture-barrier liners available on request. Three details protect a lot: a liner that keeps humidity out, a batch number printed on every bag, and a loading plan built around bulk density, since a light material fills a container by volume long before it reaches a weight limit.

Request a Quotation

Send your target mesh, steel and fiber limits, PAH limit and destination port. We will quote crumb rubber to that specification, with a sieve analysis and a batch test report attached, and confirm the bag type that suits your unloading equipment.

Jika anda berminat dengan produk kami, anda boleh memilih untuk meninggalkan maklumat anda di sini, dan kami akan menghubungi anda sebentar lagi.